AP2
AP2 economy central controller
AP4
AP4 central controller with IR learner
The new AP2 and AP4 from APAV represent our 5th generation of central controllers.
Both controllers are identical except the AP4 adds a “built-in” infrared IR learner, a front panel LCD that displays IP address, button states, system time and firmware version and 4 front panel programmable push buttons.
Programming is web server based through Google Chrome.
Programming and debugging are also Cloud supported so changes can be done remotely.
| Specification | Parameter |
|---|---|
| CPU | i.MX ARM Cortex-A7 528MHz |
| OS | Linux 4.1.15 |
| Memory | 512M DDR3 RAM |
| Flash | 4096 EMMC |
| Relay | 8-isolated low voltage (normally open) 30VDC/AC 1A |
| I/O | 8-Digital |
| Infrared-Serial | 8 infrared or one-way serial port |
| COM Ports A,B,C,D | two-way RS232 on DB9 connectors |
| COM Ports E,F,G,H | two-way RS232/422/485 on 7 pin Phoenix connectors |
| LAN | 1 RJ45 10M/100M Ethernet interface |
| USB | 1 USB interface |
| RST | 1 System Reset button |
| LED | 3 intelligent system status indicators |
| RES | 1 RES system reserved debugging interface |
| Programmable Keys | 4 front panel push button-AP4 only |
| Liquid Crystal Display | front panel-AP4 only |
| Infrared IR learning window | front panel-AP4 only |
| Power Supply | 24VDC 1A |
| Installation | desk or 19″ EIA rack standard-adapters included |
| Working environment temperature | 41-113 degrees Fahrenheit |
| Working environment humidity | 10%-90% |
| Size and weight | 17″W x 1.75″H x 7.5″D, 7 lbs. |